[ Ubc-100 Power On /Off/ Pairing ] - UNB Tech CarSay UBC-100 User Manual

3. How to use
Very Long Key
[ Power ON ] (
In order to turn
turning on from the g
Very Long Key
(
[ Power OFF ]
In order to turn
and the indication tone of turning off from the
glow for 3 seconds to turn off.
[ Pairing ]
UBC-100 works with Bluetooth
please make sure that your mobile phone is Bluetooth
Pairing is only required for the first time you use
procedure will be various depending on the model of your mobile phone.
Please refer to your mobile phone user guide for more detailed pairing instructions.
▪ Steps for the Pairing
(1) Make sure that your (1) Make sure that your
(2) Activate your mobile phone's Bluetooth function.
(3) There are two types of
1) Pairing mode 1) Pairing mode
Press and hold
sound once from the
)
UBC-100 on, press and hold
UBC-100 speaker and release it. And then, the Blue LED light will flash 3 times rapidly.
p
)
UBC-100 off, press and hold
enabled devices. Before pairing your
® ®
® ®
UBC 100 is powered off. UBC-100 is powered off
UBC-100 pairing modes.
(MFB) button for 5 ~ 7 seconds until you hear the indication tone of turning on and the beep
UBC-100 speaker and release it. And then, Blue & Red LED light rapidly flash alternately.
(MFB) button for 2 ~ 4 seconds until you hear the indication tone of
,
(MFB) button for 4 seconds until you hear the beep sound 4 times
UBC-100 speaker and release it. And then, the RED LED light will
capable and the Bluetooth
® ®
UBC-100 with your mobile phone. The hands-free car-kit pairing
g
UBC-100 hands-free car-kit for the first time,
features are enabled.
p y