Table of Contents
Advertisement
3. How to use
(
Long Key
[ MIC mute ]
In order to turn MIC off, press both
beep sound twice and release it.
Reversely in order to turn MIC on, press both
hear the beep sound twice and release it.
[ Auto reconnecting ]
[ Auto reconnecting ]
UBC-100 and your mobile phone will be disconnected (Link-Lost) each other at the moment when the distance
UBC-100 and the mobile phone is above the operation range, 10 meters (33 feet).
between
When both devices come close within the range
When both devices come close within the range,
other, however, for the activation of the auto reconnecting function, they must be brought back in that range within
16 hours. After 16 hours (around 960 minutes) out of the operation range,
off by itself.
y
From the moment when
Note
Note
devices are link-lost each other
with the mobile phone.
4-minute 20 seconds intervals for 840 minutes.
In order to use the auto reconnecting function, an initial pairing between both devices must be done before.
)
(Volume up) and
UBC-100 and your mobile phone are not in operation range, which means both
UBC-100 emits the signal at 3-minute intervals for 120 minutes(2 hours) and then at
(Volume down) button for 1.5 seconds until you hear the
(Volume up) and
(Volume down) button for 1.5 seconds until you
UBC-100 and the mobile phone will be auto-reconnected each
UBC 100 and the mobile phone will be auto reconnected each
UBC-100 will seek your mobile phone as emitting signals to reconnect
UBC-100 will be automatically turned
Advertisement
Table of Contents
