Contents …………………………………………… 3 1. Package Contents …………………………………………… 4 2 Description of parts 2. Description of parts …………………………………………… 5 3. How to use …………………………………………… 5 UBC-100 Charging ] ………………………………………… 6 UBC-100 Power ON /OFF/ Pairing ] …………………………………… 8 UBC-100 Call Make/Answer/End Call ] ………………...
1. Package Contents UBC-100 Bluetooth® Hands-free Car-kit! We hope you enjoy it! This instruction Thank you for purchasing the UBC-100. manual will get you started and ready to make the most of your Ensure that the following is included in the package. Hands-free Car-kit Sun visor Clip User Guide...
2. Description of parts Volume Down Button Red LED Indicator MFB (Call/Power) Button Volume Up Button Blue LED Indicator Blue LED Indicator Clip USB Charging Port Earphone Jack Speaker...
3. How to use [ Charging ] UBC-100 comes with a built-in rechargeable battery. Ensure that your UBC-100 is fully charged before first use. (1) Pl (1) Plug the Micro USB 5-pin connector of the charging cable or the cigar jack adapter into the charging port located th Mi USB 5 i f th...
3. How to use Very Long Key [ Power ON ] UBC-100 on, press and hold In order to turn (MFB) button for 2 ~ 4 seconds until you hear the indication tone of UBC-100 speaker and release it. And then, the Blue LED light will flash 3 times rapidly. turning on from the Very Long Key [ Power OFF ]...
Page 7
3. How to use 2) Auto pairing mode ① press and hold (MFB) button for 2~4 seconds until you hear the indication tone of turning on from the UBC-100 speaker and release it. And then, the Blue LED light will flash 3 times rapidly. ②...
3. How to use [ Making a call ] Short Key ① Voice dialing ( If your mobile phone is equipped with a standard voice dialing function, you can activate voice dialing. UBC-100 speaker, and then Briefly press (MFB) button until you hear the beep sound once from the say the registered name on the voice dialing list of the mobile phone.
3. How to use Long Key [ Rejecting a call ] If you do not wish to answer an incoming call, press (MFB) button for 1.5 seconds until you hear the beep sound twice UBC-100 speaker and release it. from the Short Key [ Volume control ] Press...
3. How to use Long Key [ MIC mute ] In order to turn MIC off, press both (Volume up) and (Volume down) button for 1.5 seconds until you hear the beep sound twice and release it. Reversely in order to turn MIC on, press both (Volume up) and (Volume down) button for 1.5 seconds until you hear the beep sound twice and release it.
4. Summary of button functions Functions UBC-100 Status Action Beep Turning ON Power OFF Press (MFB) button for 2~4 seconds. (Very Long) Power ON Tone Power OFF Turning OFF Power ON Press (MFB) button for 4 seconds. (Very Long) Tone Volume Up Talking Briefly press...
5. Summary of LED indication Function & UBC-100 Status LED Indication Condition Turn ON Blue LED light flickers 3 times. Turn OFF Red LED light is on for 2 seconds and then the light is turned off. Pairing Mode Blue and Red LED light rapidly flash alternately. Functions Car-kit connected (HFP or HSP) Blue LED light flashes once every 10 seconds.
6. Troubleshooting Symptom Check-up Troubleshooting UBC-100 UBC-100 with USB Please check if the battery of Please charge your When the power is not on… has been charged before use. power cable. Please make sure Bluetooth function has been Please check if the Bluetooth mobile phone or enabled on the device and choose one Bluetooth device supports HFP(Hands-free th d...
8. Warning! • Always store the product with the power off and safely protected. • A void storage at extreme temperatures (above 45°C/113°F –including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. •...
9. Warranty Limited Two (2) -Year Warranty U&B Tech A/S, warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of two (2) year from the date of purchase (“Warranty Period”). During the Warranty Period, U&B Tech will repair or replace (at U&B Tech’s discretion) this product or any defective parts (“Warranty Service”).
Any unauthorized modification to the antenna or device could void the user’s authority to operate this device. CE 1177 This product is CE marked according to the provisions of the R & TTETTE Directive (99/5/EC). Hereby, UNB Tech, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.