How To Use; [ Ubc-100 Charging ] - UNB Tech CarSay UBC-100 User Manual

Noise canceling bluetooth hands-free car free car-kit
Table of Contents

Advertisement

3. How to use

[ Charging ]
UBC-100 comes with a built-in rechargeable battery. Ensure that your
(1) Plug the Micro USB 5-pin connector of the charging cable or the cigar jack adapter into the charging port located
(1) Pl
th Mi
USB 5 i
on the side of
(2) With USB charging cable, You can charge
charging cable into a USB port in your personal computer.
charging cable into a USB port in your personal computer
(2') With Cigar jack adapter(An optional item), Plug the cigar jack of the adapter into a car outlet.
Please make sure that the computer or the car is powered on.
Tip
Tip
(3) While charging, the RED LED light(
(3) While charging, the RED LED light(
(4) When charging is complete, the RED LED light will be turned off.
UBC-100 from the charging cable or the cigar jack adapter.
(5) Unplug
(It takes about 2 hours to charge a fully depleted battery of
(It takes about 2 hours to charge a fully depleted battery of
(1)
[
[ LOW Battery ]
y ]
When the battery is nearly depleted in either active or standby mode.
UBC-100 will make a beep sound once every 60 seconds and
(1)
(2) the RED LED light(
t
f th
h
i
UBC-100.
) will be turned on and remain lit until
) will be turned on and remain lit until
(2)
) will flash once every 4 seconds.
bl
th
i
j
k d
t
UBC-100 directly from your PC or MAC by plugging the USB end of the
UBC 100)
UBC-100)
(2')
UBC-100 is fully charged before first use.
i t th
h
i
t l
t d
UBC 100 is fully charged.
UBC-100 is fully charged.
(3,4)
Complete
Charging

Advertisement

Table of Contents
loading

Table of Contents