Menu Structure: Overview Installer Settings - Daikin CHYHBH05AA Installer's Reference Manual

8 Configuration
INFORMATION
Depending on the selected installer settings and unit type,
settings will be visible/invisible.
8.1.5

Menu structure: Overview installer settings

[A] Installer settings
Language
System layout
Space operation
Domestic hot water (DHW)
Heat sources
System operation
Commissioning
Overview settings
INFORMATION
Depending on the selected installer settings and unit type,
settings will be visible/invisible.
INFORMATION
Demand PCB settings are shown but are NOT applicable
for this unit. Settings shall NOT be used or changed.
INFORMATION
External kWh meter settings are shown but are NOT
applicable for this unit. Settings shall NOT be used or
changed.
Installer reference guide
62
[A.2] System layout
Standard
Options
Confirm layout
[A.3]
Space operation
LWT settings
Room thermostat
Operation range
[A.4]
Domestic hot water
Type
Disinfection
Maximum setpoint
SP mode
Weather-dependent curve
[A.5] Heat sources
Boiler
[A.6] System operation
Auto restart
Averaging time
Ext amb. sensor offset
Savings mode
Emergency
[A.7] Commissioning
Test run
UFH screed dryout
Air purge
Actuator test run
[A.2.1] Standard
Unit type
Compressor type
Indoor software type
Forced off contact
Unit control method
Number of LWT zones
Pump operation mode
User interface location
Options
[A.2.2]
DHW operation
DHW tank
DHW tank type
Contact type main
Contact type add.
Digital I/O PCB
Demand PCB
External kWh meter
DHW pump
External sensor
Gas meter
LAN adapter
[A.3.1] Leaving water
Main
Additional
[A.3.2] Room thermostat
Room temp. range
Room temp. offset
Ext. room sensor offset
Room temp. step
[A.3.3] Operation range
Space heating OFF temp
[A.4.4] Disinfection
Disinfection
Operation day
Start time
Temperature target
Duration
[A.5.2] Boiler
Equilibrium temp.
INFORMATION
Gas meter settings are shown but are NOT applicable for
this unit. Settings shall NOT be used or changed.
Daikin hybrid for multi heat pump – heat pump module
[A.2.2.6] Digital I/O PCB
Solar kit
Alarm output
[A.3.1.1] Main
LWT setpoint mode
Temperature range
Modulated LWT
Shut-off valve
Emitter type
[A.3.1.2] Additional
LWT setpoint mode
Temperature range
CHYHBH05+08AA + EHYKOMB33A
4P471761-1A – 2017.10