Siemens Silver 3208XS Operating And Installation Instructions page 48

G 1 /2
Plastic connector
CS code 424387
Water tap
CS code 184611
46
The filters at the free end of the inlet hose and
at the back of machine should only be removed
for cleaning purposes.
To avoid water damage the tap must be turned
OFF after using the machine.
The plastic nuts on the hose connections must
only be tightened by hand.
For tight connection between washing machine
and water source, you can,
1. Call Customer Service before you install the
machine,get the plastic connector freely. It may
connect tightly the water inlet pipe and your
water tap.
2. Or you may purchase the specific water tap
from customer service. It is designed by factory.
It may be better connected with machine than
your water tap.
Note: The water tap is not free.
Caution
Do not disassemble the water inlet hose frequ-
ently, the untight connection will lead to leakage.
We suggest that you use a water inlet hose sp-
ecially for the washing machine.
If you need to lengthen the water inlet hose to-
gether with the machine, please contact local
ASS center/station or dealer to buy additional
lengthening hose.
Additional lengthening water inlet hose is not
free.