Siemens Silver 3208XS Operating And Installation Instructions page 26

Spin speed
Start time
24
You can reduce the displayed spin speed.
The maximum displayed spin speed depends on
the selected program.
Press button until the required spin speed.
If setting - - - (without final spin) has been
ｉ
selected,the washing remains in the final rins-
ing water.
Before the laundry can be unloaded,the Empty
or Spin program must be performed.Or press-
ing button to select the desired spin speed.
ｉ
The spin speed can be changed at any time by
pressing the
is displayed.
Setting - - - (without final spin) is possible
until the Rinse program section starts.
Before a program starts,you can specify by how
many hours the start of the program is to be delayed.
Press the
Press the
hours is displayed.
ｉ
The start time can be set in 1-hour steps.
The time can be delayed up to a maximum
of 19h.If a start time of 19h has been set,the
program duration time can be accessed by
pressing the
ｉ
The time delay is counted down by the hour.
When the start time has elapsed,the program
starts automatically and the program duratin
is displayed.
ｉ
Changes to the start time or an immediate start
are possible.To do this:
Briefly set the program selector to another
program.
When the program selector has been reset to
the original program,individual or all other
settings may have to be reselected.If required,
reset the start time.
Press the start
The program starts.
,,
button until the desired speed
,,
button, appears in the display.
button until the desired number of
button again.
,,
time.