Cleaning The Drain Pump - Siemens Silver 3208XS Operating And Installation Instructions

Cleaning the drain
pump
Draining the washing
solution
This is necessary if the washing solution can not
be completely drained. The pump is blocked by
either loose debris or fluff which accumulates if
fluff-giving fabrics are washed at high temperature.
The water in the drum should be drained first
before cleaning the drain pump.
Up to 20 litres. Have a suitable container ready.
! Risk of scalding
Allow the hot washing solution to cool.
Turn the program selector to Off .
Fold down the cover panel.
Carefully remove the pump cap.But don t fully
remove it and allow a little more residual water
flow into the suitable container.
Remove any loose debris/fluff from inside the
pump and clean the pump. The pump impeller
must be able to rotate.
Clean any residual suds or fluff from the thread
of the pump cap and pump housing.
Attach and tighten the pump cap.
Attach and close the cover plate.
To avoid unused detergent from flowing into the
drain during the next wash cycle:
Pour 1 litre of water into chamber II.
Select the Draining program.
,,
,,
,
33