Siemens Silver 3208XS Operating And Installation Instructions page 39

Fault
The loading door cannot
be opened.
Detergent residue in the
detergent dispenser.
The gasket is crimped.
The belt gets off the pulley.
Control lights do not
come on.
The program does not start.
Water does not enter the
machine or detergent is
not wash away.
Detergent in chamber I is
not wash away.
Water cannot be seen in
drum.
Possible cause
There is water in drum.
Safety function is active.
Detergent was damp or
lumpy.
This may appears after
installing the transport bolts.
Too much laundry is in the
drum or the laundry is put in
badly, and close the window
with excessive force.
A fuse has triggered.
Power failure.
Plug is loose or not inserted.
Loading door not closed.
,,
Start button does not
pressed.
Water tap not turned on.
Strainer in supply hose
clogged.
,,
Prewash function is
not selected.
This is not a fault.
The water lies below the visible part of the drum.
Action
,,
Select Draining or Spinning .
Wait for 2 minutes.
Clean and dry the detergent
dispenser(refer to Page 32)
Use the dispensing aid for liquid
detergent.
Remove the transport bolts, operate
the machine for a period of time, the
gasket will return to the original shape.
Put in the laundry well and according
to the maximum load specifiction.
Switch on/replace the fuse.
Call Customer Service if this fault
is repeated.
An interrupted program will be re-
sumed when power retures. If you
wish to unload the laundry, proce-
,,
ed as in Cleaning the drain pump ,
Page 33.
Check whether laundry is trapped
in door.
Close the loading door(a click sh-
ould be heard).
,,
Press the Start button.
Turn on water tap.
Clean the strainer
(refer to Page 34)
,,
Press Prewash button
,,
37