Kennmex POS 608 User Manual page 35

Parallel Port IRQ
This option specifies the IRQ used by the parallel port. The settings are Auto, (IRQ) 5, (IRQ) 7.
Parallel Port DMA Channel
This option is only available if the setting for the Parallel Port Mode option is ECP. This option sets
the DMA channel used by the parallel port. The settings are DMA Channel 0, 1, or 3.
On Board IDE
This option specifies the IDE channel used by the onboard IDE controller
The settings are Disabled, Primary, and Secondary.
PC Health Status
AMIBIOS SETUP – HARDWARE MONITOR SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
Chassis Intrusion
Smart Fan Function
-= System Hardware Monitor =-
Vcore
+ 3.3V
+ 5.0V
+12.0V
+ 2.5V
Vtt
CPU Fan Speed
System Fan Speed
CPU Temperature
System Temperature
This setup helps users monitor the EBN-370 board on board system voltage and fan speed. The
function is implemented by on board W83697HF chip. The voltage monitoring will cover V core,
+3.3V, +5V,+12V, +2.5V and Vtt. And there is one fan connector for CPU fan.
Disabled Available Options:
Disabled > Disabled
1.456 V
3.376 V
4.911 V
11.746 V
2.537 V
1.232 V
5718 RPM
0 RPM
41ºC/105ºF
37ºC/98ºF
ESC:Exit
PgUp/PgDn:Modify
F2/F3:Color
Figure 8: Hardware Monitor Setup
35
Enabled
:Sel
↑↓