Kennmex POS 608 User Manual page 30

Advanced Chipset Features
********* DRAM Timing *********
Configure SDRAM Timing by SPD
SDRAM Frequency
Auto
SDRAM CAS# Latency
SDRAM Bank Interleave
Disabled
SDRAM Command Rate
Memory Hole
Auto Prechrage for TLB/WB
Write Recovery time
AGP Mode
AGP Read Synchronization
AGP Fast Write
AGP Aperture Size
AGP Master 1 W/S Write
AGP Master 1 W/S Read
PCI Delay Transaction
USB Controller
USB Device Legacy Support
V-Link Data 2X Support
Configure SDRAM Timing by SPD
This sets the optimal timings for items "SDRAM Refresh", "SDRAM Cycle time", "CAS# Latency",
"RAS to CAS delay" and "SDRAM RAS# Precharge", depending on the memory modules that you
are using.
SDRAM Frequency
This field displays the capability of the memory modules that your system
memory frequency.
SDRAM CAS# Latency
This controls the latency between the SDRAM read command and the time that the data actually
becomes available.
AGP Aperture Size
This feature allows you to select the size of mapped memory for AGP graphic data.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have USB
peripherals.
USB Device Legacy Support
This motherboard support Universal Serial Bus (USB) devices. If detected, USB controller legacy
mode will be enabled. If not detected, USB controller legacy mode will be disabled.
The Choice: Enabled, Disabled
AMIBIOS SETUP – ADVANCED CHIPSET SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
Figure 4: Advanced Chipset Setup
Available Options:
Enabled
> Enabled
2.5
2T
Disabled
Disabled
2T
4x
Disabled
Disabled
64MB
Disabled
ESC:Exit
Disabled
PgUp/PgDn:Modify
Enabled
F2/F3:Color
6 USB Ports
Disabled
Disabled
30
Disabled
:Sel
↑↓