Kennmex POS 608 User Manual page 33

Power Management Setup
Plug and Play Aware O/S
OnChip VGA Frame Buffer Size
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
Boot Device Select
LCD Expansion Support
LCD Panel Type
PCI IDE Bus Master
Off Board PCI IDE Card
Off Board PCI IDE Primary IRQ
Off Board PCI IDE Secondary IRQ
Plug and Play Aware O/S
If enable, BIOS will configure only PnP ISA boot devices (i.e. all PnP ISA cards which has boot
flag set). And PnP aware OS will configure all other devices. If disable, BIOS will configure all
devices.
PCI Latency Timer (PCI Clocks)
This option specifies the latency timings (in PCI clocks) for PCI devices installed in the PCI
expansion slots. The settings are 32, 64, 96, 128, 160, 192, 224, or 248.
PCI VGA Palette Snoop
If enable, PCI will allow VGA palette signals to go to the ISA bus.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C)2001 American Megatrends, Inc. All Rights Reserved
Figure 6: PCI / Plug and Play Setup
No Available Options:
16MB
32 > Yes
PCI
CRT+LCD
Enabled
1 800x600
Enabled
Auto
Disabled
Disabled
ESC:Exit
PgUp/PgDn:Modify
F2/F3:Color
33
No
:Sel
↑↓