Kennmex POS 608 User Manual page 28

Try Other Boot Devices
Set this option to Yes to instruct AMIBIOS to attempt to boot from any other drive in the system
if it cannot find a boot drive among the drives specified in the 1st Boot Device, 2nd Boot Device,
3rd Boot Device, 4th Boot Device options. The settings are Yes or No.
S.M.A.R.T. for Hard Disks
Self-Monitoring, Analysis and Reporting Technology. This option can help the BIOS to warn the
user of a possible device failure and give the user a chance to back up the device before the
failure actually happens. The settings are Auto, Disabled, Enabled.
Boot Up Num-Lock
When this option is selected, Num Lock is turned off when the system is powered on so the user
can use the arrow keys on both the numeric keypad and the keyboard.
Floppy Drive Swap
Set this option to Enabled to permit drives A: and B: to be swapped. Configuration options:
Enabled or Disabled.
Floppy Drive Seek
Set this option to Enabled to specify that floppy drive A: will perform a Seek operation at system
boot. The settings are Enabled or Disabled.
PS/2 Mouse Support
When this option is enabled, BIOS supports a PS/2- type mouse.
System Keyboard
This option does not specify if a keyboard is attached to the computer. Rather, it specifies if error
messages are displayed if a keyboard is not attached. This option permits you to configure
workstation with no keyboard. The settings are Absent, Present.
Primary Display
Select this option to configure the type of monitor attached to the computer. The settings are
Monochrome, Color 40x25, Color 80x25,VGA/PGA/EGA, or Not Install.
Password Check
This item allows you Setup/Always Password Check.
Boot To OS/2
Set this option to Enabled if running OS/2 operating system and using more than 64MB of
system memory on the motherboard. The settings are Disabled or Enabled.
L1 Cache
The option Disabled/Enabled the internal cache memory in the processor.
L2 Cache
The option Disabled/Enabled the secondary cache memory.
System BIOS Cacheable
When this option is set to enabled, the System ROM area from F0000-FFFFF is copied (shadowed)
to the RAM for faster execution.
C000,32k Shadow
When this option is set to enabled, the Video ROM area from C0000-C7FFF is copied (shadowed)
to the RAM for faster execution.
Disabled: The contents of the video ROM are not copied to the RAM.
Cached: The contents of the video ROM area from C0000h – C7FFFh are copied from the ROM
to the RAM and can be written to or read from the cache memory.
28