Preparing The Installation - Samsung AM160FNBDEH Installation Manual

Preparing the installation

Tools required for installation
General tools
① Vacuum pump ② Torque wrench
⑥ Spirit level ⑦ Screw driver
⑪ Measuring tape
Tools for operation
① Thermometer
Accessories (supplied)
Before the installation, make sure to check if following accessories are included inside the DVM Hydro unit / Hydro unit HT.
Installation manual
Additional accessory (not included)
Additional accessory needs to be purchased separately and installed to operate DVM Hydro unit / Hydro unit HT.
(Model name of the wire remote controller : MWR-WW00N)
Wired remote controller
Recommended specification of the strainer
Model type Model name
ADN160BDE✴✴
ADN320BDE✴✴
AM160FNBD✴✴
HE
AM320FNBD✴✴
ADN500BDE✴✴
AM500FNBD✴✴
HT AM✴✴✴FNBF✴✴
③ Pipe cutter
⑧ Spanner
② Resistance meter
Drain plug
Work
Work pressure
temperature
-5~48 °C
1.0 MPa
-20 ~ 35 °C
④ Reamer ⑤ Pipe bender
⑨ Drill ⑩ L wrench
③ Electroscope
Drain cap
Water pipe
Mesh size
connection part
PT 1(25A)
50 Mesh
PT 1-1/4(32A)
PT 1(25A)
Material
(Strainer/Mesh)
AISI316/SUS304
5