Table of Contents
Advertisement
CLEANING & MAINTENANCE
The shaver is a washable appliance. The head assembly part may be cleaned
under water.
NOTE: **When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.**
CAUTION!
•
To clean the external surfaces of the shaver, use a damp cloth. Do not use strong
detergents or other chemicals.
•
To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer or
heater to dry the shaver.
NOTE: Lubricate cutters after rinsing.
DAILY CLEANING
NOTE: We recommend following these steps after each use.
E
1.
Grasp the front and back of the cutter assembly and pull away from the shaver
body. (Diagram E)
2.
Tap out excess hair shavings and use the cleaning brush to sweep any loose hairs
away. (Diagrams F-G)
3.
Rinse the head of the assembly under running water. Gently towel dry or leave to
air dry.
4.
Replace the head assembly when dry by placing the assembly on top of the hair
pocket, press down and click into place. (Diagram H)
NOTE: Lubricate teeth of trimmer with oil every six months.
F
G
7
H
Advertisement
Table of Contents
