MONTHLY CLEANING
I
1.
Perform steps 1-3 of the daily cleaning.
2.
Place a drop of soap on each cutter and hairpocket. (Diagram I)
3.
Brush the soap around vigorously with the cleaning brush. (Diagram J)
4.
Add a small amount of water to the cutters.
5.
Replace the foil assembly. (Diagram K)
6.
Turn the shaver on for approximately 30 seconds.
7.
While shaver is running rinse the foils under running water. (Diagram L)
8.
Turn off shaver, remove foil assembly and rinse the cutters, hair pocket and foil
assembly throughly. (Diagram M)
9.
Shake off excess water.
10.
Replace foil assembly.
11.
Allow shaver to dry before next use.
J
L
K
M
10
L