Rear Panel Parts Descriptions - Sony SCD-C222ES Operating Instructions Manual

Rear Panel Parts Descriptions

ANALOG
2CH OUT 5.1CH OUT
FRONT SURR CENTER
L
L
R
R
WOOFER
1 ANALOG 2CH OUT L/R jacks (5)
Connect to an audio component (stereo/2 channel)
using the audio connecting cord.
2 ANALOG 5.1CH OUT jacks (4)
Connect to an amplifier equipped with the 5.1CH
input jacks (Multi-channel amplifier, AV amplifier,
etc.) using the audio connecting cords.
3 DIGITAL (CD) OUT COAXIAL connector (6)
Connect to an audio component using an coaxial
digital cable.
4 DIGITAL (CD) OUT OPTICAL connector (6)
Connect to an audio component using an optical
digital cable.
5 CONTROL A1 jacks (6, 26)
Connect to a Sony audio component using the
monaural (2P) mini-plug cord.
8
US
DIGITAL (CD)
CONTROL
A1
OUT
COAXIAL OPTICAL
SUB
Note
Only the audio signals of the CD can be output from the
DIGITAL (CD) OUT connectors shown in 3. Those of the Super
Audio CD cannot be output through DIGITAL (CD) OUT.