Wideye Sabre Shield Installation Manual page 9

SABRE Shield Installation Guide
TM
7. Install the base plate back to the SABRE
8. Install four screws to secure the base plate to the SABRE
Screws
9. Insert the power plug into the DC power input socket on the SABRE
Remote terminal.
10. Insert the connector end of the Phone cable to the SABRE
terminal Analog Phone (RJ11) port.
11. Insert the connector end of the Ethernet cable to the SABRE
terminal Ethernet (RJ45) port.
DC power input socket
Analog phone (RJ11) port
Ethernet (RJ45) port
Shield.
TM
TM
Shield.
Screws
TM I
I Remote
TM
TM I Remote
8