Advertisement
DEMO MANUAL DC2064A
Quick start proceDure
Figure 29. Proper Measurement Equipment Setup for Bidirectional Cell Balancer
Note: All connections from equipment should be Kelvin connected directly to the Board Pins which they are connected
to on this diagram and any input, or output, leads should be twisted pair, where possible.
16
System Setup Requirements:
LFP or Li-Ion Battery ≥ 10AHr
Internal Resistance < 30mΩ
Recommended Battery Simulator:
Power Supply 2V to 5.0 V ±10A
Interconnect Resistance < 25mΩ
dc2064afa
Advertisement
