Changing The Tolerance For The Auto - Volvo XC90 Owner's Manual

Changing the tolerance for the
Automatic Speed Limiter
The Automatic Speed Limiter function (ASL
can be set for different tolerance levels.
It is possible to increase/decrease the signed
speed limit. If, for example, the car follows a
signed speed limit of 70km/h (43 mph) the
driver can instead choose to allow the car to
maintain 75 km/h (47 mph).
24
Buttons and symbols for functions .
23 Automatic Speed Limiter
24 NOTE: The illustration is schematic - details may vary depending on car model.
Road Sign Information - RSI
25
–
Press the steering wheel button
until 70 km/h (43 mph) in the centre of the
speedometer (4) changes to 75 km/h
23
)
(47 mph).
> After which, the car uses the selected tol-
erance 5 km/h (4 mph) as long as signs
passed are showing 70 km/h (43 mph).
The tolerance is followed until a road sign
with a lower or higher speed is passed -
then the car follows the new signed
speed limit instead and the tolerance is
deleted from the memory.
If the Road Sign Information* function is
activated, the signed speed limit will then
be shown with a RED indicator on the
speedometer.
The tolerance is adjusted in the same way as the
speed setting is in the speed limiter.
NOTE
The maximum selectable tolerance is
+/- 10 km/h (5 mph).
Related information
•
Speed Limiter (p. 292)
Limitations for Automatic Speed
(1)
Limiter
Automatic speed limitation takes place using
speed information from the RSI
from the speed limit road signs that the car
passes.
25
If RSI cannot interpret and provide speed infor-
mation to the ASL, then the ASL is set in standby
mode and changes over to SL. In such cases the
driver must intervene and brake to a suitable
speed.
The ASL will be reactivated when the RSI
tion can once again interpret and provide speed
information to the ASL.
See also the section "Limitations for Road Sign
Information".
Related information
•
Speed Limiter (p. 292)
DRIVER SUPPORT
25
function - not
25
func-
299
* Option/accessory.