Sensor Fields From Park Assist Pilot For Parking Camera; Starting The Park Assist Camera - Volvo XC90 Owner's Manual

DRIVER SUPPORT
Sensor fields from Park Assist Pilot
for parking camera
If the car is equipped with Parking assistance
then the distance is shown in the 360° view with
coloured fields for each sensor that registers an
obstacle.
Sensor fields backwards and forwards
The screen can show coloured sensor fields on the car
symbol 122 .
The figure is schematic - parts may vary depending on car model.
122
410
The fields for the front and reversing sensors
change colour as the distance to the obstacle
decreases — from yellow through orange to red.
Colours of front and Distance in metres
reversing fields
Yellow 0,6-1,5 (2,0-4,9)
Orange 0,4-0,6 (1,3-2,0)
Red 0-0,4 (0-1,3)
Sensor field to the sides
The side fields are only shown in orange.
Colour of side fields Distance in metres
Orange 0-0,3 (0-1,0)
Related information
•
Park assist camera* (p. 405)

Starting the park assist camera

The park assist camera starts automatically
when reverse gear is engaged or manually with
one of the centre display's function buttons.
(feet)
Camera view when reversing
When reverse gear is engaged, the screen shows
the 360° view if it or any of the side views was
the last used camera view, otherwise the rear
view is shown.
Camera view for manual camera start
(feet)
start, the previously shown side view is replaced
by the 360° view and the previously shown
zoomed rear view is replaced by the rear view.
Automatic deactivation of camera
The front view extinguishes at 25 km/h (16 mph)
to avoid distracting the driver - it reactivates auto-
matically if the speed drops to 22 km/h (14 mph)
within 1 minute, on the condition that the speed
has not exceeded 50 km/h (31 mph).
Other camera views are extinguished at 15 km/h
(9 mph) and not reactivated.
Start the parking camera with
this button in the centre dis-
play's function view.
The screen then initially shows
the last used camera view.
However, after each engine
* Option/accessory.