Select Rest Stop Guidance In The; Limitations Of Driver Alert Control; Lane Assistance - Volvo XC90 Owner's Manual

Hide thumbs Also See for XC90:
Table of Contents

Advertisement

Select rest stop guidance in the

event of a warning with Driver Alert
Control
Rest Stop
It is possible to set whether the
Guidance
function should be activated/deacti-
vated.
With the guide activated, an automatic sugges-
tion for an appropriate rest area is displayed
while DAC issues a warning.
To select
Rest Stop Guidance
:
1. Tap on
Settings
in the centre display's top
view.
2. Select
My Car
IntelliSafe
Control.
3. Select/deselect
Rest Stop Guidance
activate/deactivate the function.
Related information
Driver Alert Control (p. 381)
Lane Keeping Aid
107

Limitations of Driver Alert Control

The Driver Alert Control (DAC) function may
have limitations in certain situations.
In some cases the system may issue a warning
despite driving ability not deteriorating, for exam-
ple:
in strong side winds
on rutted road surfaces.
WARNING
In some cases, driving behaviour is not affec-
ted despite driver fatigue – e.g. when using
Driver Alert
the Pilot Assist function – resulting in the
driver not getting a warning from DAC.
It is therefore important to always stop and
to
take a break at the slightest feeling of fatigue,
whether the DAC function ha given a warning
or not.
NOTE
The function uses the car's camera unit,
which has some general limitations, see the
"Limitations for camera unit" section.
Related information
Driver Alert Control (p. 381)
DRIVER SUPPORT

Lane assistance

The function of the Lane Keeping Aid (LKA
to help the driver to reduce the risk of the car
accidentally leaving its own lane on motorways
and similar major routes.
Lane Keeping Aid steers the car back into its
lane and/or alerts the driver with vibrations in the
steering wheel.
Lane Keeping Aid is active within the speed
range 65-200 km/h (40-125 mph) on roads with
clearly visible side lines.
On narrow roads the function may be unavailable,
in which case it goes into standby mode. The
function becomes available again when the road
is wide enough.
A camera reads the side lines of the road/lane.
107
) is
}}
383

Advertisement

Table of Contents
loading

Table of Contents