Advertisement
IMPORTANT SAFEGUARDS &
CAUTIONARY INFORMATION
FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS
BEFORE OPERATING YOUR NUTRIBULLET.
ELECTRICAL SAFETY
When using any electrical appliance, basic safety precautions should always be
observed, including the following:
• Caution! To avoid risk of electric shock, never immerse the power cord, plug,
or power base of blender in water or other liquids.
• The use of attachments not recommended or sold by the manufacturer may
cause fire, electric shock, or injury.
• This appliance has important markings on the plug blade. The attachment
plug or entire cord set is not suitable for replacement. If damaged, the
appliance shall be replaced.
• DO NOT USE THE NUTRIBULLET WITH ANY TYPE OF ADAPTOR OR VOLTAGE
CONVERTER DEVICE. IT IS MANUFACTURED IN COMPLIANCE WITH UNITED
STATES AND CANADIAN ELECTRICAL STANDARDS AND PLUG TYPES.
• USE OF ADAPTERS AND CONVERTERS IS CONSIDERED AN UNAUTHORIZED
MODIFICATION OF THE NUTRIBULLET AND AS SUCH WILL VOID THE
WARRANTY. USE OF THE NUTRIBULLET IN AREAS WITH DIFFERENT
ELECTRICAL SPECIFICATIONS MAY RESULT IN DAMAGE TO THE PRODUCT.
• UNPLUG THE NUTRIBULLET WHEN IT IS NOT IN USE. MAKE SURE THE
POWER BASE IS UNPLUGGED BEFORE ASSEMBLING, DISASSEMBLING,
ADDING ADDITIONAL PARTS, OR CLEANING.
• IF THE POWER BASE DOES NOT STOP AFTER ONE MINUTE, UNPLUG IT AND CALL
CUSTOMER SERVICE.
• Do not pull, twist, or damage the power cord.
• Do not allow the power cord to hang over the side of the counter or table.
• Do not allow the power cord to touch hot surfaces, including stove.
• Periodically inspect the power cord and plug for signs of damage. Never
operate any appliance with a damaged power cord or plug.
• If the NutriBullet malfunctions or is dropped, or damaged in any manner,
discontinue use and contact Customer Service for further assistance.
• At all times, avoid contact with moving parts.
• Keep hands and utensils away from the cutting blade while chopping or
blending food to reduce the risk of severe personal injury or damage to the
device. A scraper may be used, but only when the blender/food chopper is
not running and the NutriBullet is unplugged.
• NEVER LEAVE THE NUTRIBULLET UNATTENDED WHILE IT IS IN USE.
• CLOSE SUPERVISION IS NECESSARY WHEN USED BY OR NEAR CHILDREN.
• To prevent overheating, never allow the motor to run for more than one
minute at a time, as this may cause damage to the motor as well as increase
the thermal pressure inside the cup which can cause personal injury.
• If the motor stops for any reason, unplug the Power Base and let it cool for at
least an hour as this will reset the internal thermal breaker.
• To reduce the risk of injury and leakage, make sure the blade base is
securely screwed onto the cup before placing it on the Power Base and
operating the NutriBullet.
• Do not use NutriBullet outdoors. Do not allow the NutriBullet to be exposed to
inclement weather elements such as rain or other wet conditions.
• BLADES ARE SHARP. HANDLE CAREFULLY.
• NEVER INSERT THE BLADE INTO THE POWER BASE WITHOUT FIRST
ATTACHING THE CUP.
• WE RECOMMEND REPLACING YOUR EXTRACTOR BLADE EVERY 6 MONTHS
OR AS NEEDED FOR OPTIMAL PERFORMANCE. TO ORDER A REPLACEMENT
BLADE, SIMPLY VISIT: WWW.NUTRILIVING.COM
• Check gasket to make sure it is completely seated in the cross blade before
each use.
• The NutriBullet is not intended for use in microwave ovens. Do not place the
NutriBullet cups, power base or any accessories in a microwave as this may
result in damage to its various parts.
• To reduce the risk of personal injury or damage to the device, keep hands and
utensils away from the cutting blade.
• Never blend carbonated beverages. Built-up pressure from released gases can
cause the sealed cup to burst, resulting in possible injury.
• Do not put hot liquids in any of the blending vessels before blending. Start
with cool or room temperature ingredients. Heated ingredients can create
internal pressure in a sealed blending vessel, which may erupt on opening
and cause thermal injury. When opening vessels after extraction, possible
pressure may be released. Make sure the vessel is pointing away from the
body when opening the cup and blade assembly.
• CAUTION! Friction from the rotating blade can cause ingredients to heat
and generate internal pressure in the sealed vessel. Do not continuously
operate for more than one minute. If the vessel is warm to touch, allow it
to cool before carefully opening it pointed away from your body.
• Never permit any blended mixture to sit inside a sealed vessel without
first releasing internal pressure.
Advertisement
