N A T U R E ’ S P R E S C R I P T I O N U S E R G U I D E...
• Always operate the NUTRIBULLET on level surface, leaving unobstructed • UNPLUG THE NUTRIBULLET Rx AND DEPRESS POWER BUTTON WHEN IT IS NOT space beneath and around the power base to permit proper air circulation. Slots IN USE. MAKE SURE THE POWER BASE IS UNPLUGGED BEFORE ASSEMBLING, and openings on the of bottom the product are provided for ventilation to ensure DISASSEMBLING, ADDING ADDITIONAL PARTS, OR CLEANING.
NUTRIBULLET Rx in SouperBlast mode. (21ºC/70ºF OR LESS) SOUP WILL HEAT DURING THE EXTRACTION PROCESS TO ~65ºC/150ºF. • DO NOT RUN THE NUTRIBULLET Rx WITH EMPTY NUTRIBULLET Rx CUPS OR NEVER LEAVE THE NUTRIBULLET Rx SOUPBLAST PITCHER AS THIS CAN DAMAGE THE UNIT.
• To prevent leakage, always align and hand-tighten or use blade remover to tighten the EXTRACTING FOR NUTRIBLASTS blade to the NutriBlast Rx cup prior to inverting it and placing the assembly on to the motor base. • NUTRIBULLET Rx IS PROGRAMMED TO RUN FOR 1 MINUTE DURING •...
AS ESCAPING STEAM AND MOISTURE MAY CAUSE SCALDING BURNS. SOUPERBLAST MODE RESTING 1 MINUTE BETWEEN CYCLES. • DO NOT RUN THE NUTRIBULLET IN SOUPERBLAST MODE FOR MORE THAN 2 CYCLES • Always attach blade to SouperBlast Pitcher and hand tighten or use the blade remover to CONSECUTIVELY WITHOUT ALLOWING THE NUTRIBULLET POWER BASE AND tighten the blade to prevent leakage prior to adding ingredients into the pitcher.
Extractor Blade and if using the SouperBlast Pitcher, put on lids. Place the cup assembly on the NutriBullet Rx Power Base for about 20-30 seconds. That will loosen the stuck ingredients, and with a light scrub and rinse,...
WHAT YOU GET: 1 Stay-fresh Resealable Lid 1 Blade Remover 1 Blade Cleaning Brush 1 Extractor Blade 1 Extractor Blade 1 High-torque Power Base 1 High-torque Power Base 1 SouperBlast Pitcher 1 Short Cup with 1 Oversized Cup with 2-piece Lid with 1 Pitcher Lid 1 Comfort Lip Ring 1 User Guide...
This WILL TURN RED AND INITIATE SOUPERBLAST MODE. will activate the NutriBullet Rx’s SMART Technology • WHEN EXTRACTING OIL BASED OR STICKY FOODS, REFER TO INSTRUCTIONS function, causing the G-Button at the front of the LISTED UNDER TAP TECHNIQUE ON PAGE 19.
FIRST TO AN APPROPRIATE MICROWAVE SAFE CONTAINER OR STOVE TOP POT the power button located 90˚ to the left side of the AND HEAT SEPARATELY—DO NOT REHEAT IN THE NUTRIBULLET Rx. G-button, to turn the machine on. Next, place the cup blade-side-down onto the power base.
HOW IT WORKS TAP TECHNIQUE SHAKE TECHNIQUE For really stubborn ingredients that are clinging to the side of the cup instead of Sometimes, if you over fill the cups with ingredients or don’t put enough water, being recirculated into the cutting zone, simply use the Tap technique. the results can increase the density of the mixture.
CLEANING OR ASSEMBLING. Washing the NUTRIBULLET Rx Cleaning the NUTRIBULLET Rx is so easy… simply place any of the pieces (except for the Power Base and blade holder) on the top shelf of the dishwasher or hand wash with warm soapy water and rinse.
Blade for proper extraction to achieve the best taste and texture results with your NUTRIBLAST Rx, Pumpkin Seeds your NUTRIBULLET Rx and to prevent damage to the blade. Add enough liquid adding additional fi ber and Sesame Seeds nutrition to every sip. Add to cover ingredients, twist on the blade, and blend.
At NutriBullet, our motto has alwyas been, it’s not what you eat...its what you absorb. Now, with the NUTRIBULLET Rx, you have the ability to extract foods into the most bio-available state possible, using the most revolutionary technology available.