Setting A User Supplied Ip Address; Figure 4-5 Control Panel - Network And Internet Connections Icon; Figure 4-6 Network And Dial-Up Connections Window; Figure 4-7 Local Area Connection Properties Dialog Box - Motorola WMC6300 User Manual

Setting a User Supplied IP Address

To setup a User Supplied IP address, first obtain a valid IP address from your Network Administrator.
This is the IP address to be entered in the IP Address box on the Internet Protocol (TCP/IP) Properties
dialog's General tab.

Procedure 4-2

Setting a User Supplied Address
From the Start menu, select Settings
1
Connections icon.
Figure 4-5
The Network and Internet Connections window will be displayed. Double-click on Network and
2
Internet Connections then right-click on the Local Area Connection icon and select Properties.
Figure 4-6
On the Local Area Connection Properties dialog, select Internet Protocol (TCP/IP), and then click on
3
the Properties button.
Figure 4-7
6881011Y52-O August 2005
Control Panel. Double click on the Network and Dial-up
Control Panel – Network and Internet Connections Icon
Network and Dial-up Connections Window
Local Area Connection Properties Dialog Box
MOTOMESH 1.0 Wireless Modem Card Users Guide
4-7