Chapter 3: Wireless Modem Card Installation
1
Locate the Antenna and insert the connector into the WMC6300 or the WMC7300 antenna port, as
shown in Figure 3-1.
Figure 3-1
2
Disconnecting a Pigtail Antenna Assembly
Complete care should be taken when disconnecting an antenna from the WMC6300 or the WMC7300
card. Follow the procedure below for correct antenna disconnection instructions:
Procedure 3-2
Disconnecting the Antenna Assembly
When disconnecting a pigtail antenna from the Wireless Modem Card use caution not to damage the
1
card, connector, or cable.
6881011Y52-O August 2005
Attach the Antenna to the WMC6300 or the WMC7300
The connector will snap into place when fully inserted.
Use only FCC approved antennas.
Never use the WMC6300 or the WMC7300 with the Antenna
disconnected from the Card.
Applying force in any direction other than parallel to the card may
3-2