Motorola MOTOMESH Duo 4300-49 User Manual page 19

Power Control
Antenna Type
Antenna Connector
Routing
Routing Engine
Routing Protocol
IEEE 802.11s Support
Network
Network Management Software
Network Interface
Network Segmentation
Quality of Service (QoS)
Security
Virtual LAN (VLAN)
Client Encryption Support
Internodal Encryption
Authentication
Power
Power Requirements
Power Connector
Power Consumption
Power over Ethernet (PoE)
Physical
Dimensions
Weight
Packaging
May 2008
to -95 dBm (at 6 Mbps)
1dB increments
Two (2) omni directional, 8 dBi (for 2.4 GHz Radio) and 10 dBi (for 5.8
GHz Radio)
N-Type
MeshConnex Layer 2 routing with Layer 1 situational-awareness
Patented, hybrid proactive/reactive routing (low latency & fast route
convergence)
Will be upgradeable to IEEE 802.11s standard (when finalized) via OTA
software updates
Wireless Management System (WMS) via secure SNMP v.3
10/100Mbps Ethernet (RJ-45) port. Canopy and IEEE 802.3af support
available
Multiple SSIDs with VLAN mapping
802.11e, EDCF, and IP precedence bits (ToS) supported via DSCP, 802.1P
Supports up to sixteen (16) per node, or 4094 per network
WEP, WPA (TKIP, AES, 802.11i) and WPA2 (TKIP, AES, 802.11i)
Intra-Mesh Security
802.1X (Client)
90-264 VAC (at 47 to 63 Hz)
10.8-14VDC input, certified LPS power supply (orderable option)
AC power cord, 12 ft
15W (with both radios operating)
22.2W (with Canopy® Connect PoE operational)
29.4W (with IEEE 802.3af Standard PoE device)
Canopy and IEEE 802.3af support available
9"x 6"x 3.5" (23.1cm x 15.2cm x 8.9cm)
4.5 lbs (2.04kg)
Outdoor, all-weather enclosure (NEMA 4)
1-5
MOTOMESH DUO 2.1 4300 Users Guide