Radio Configuration - ProLinx 6201-WA-ASCII Setup Manual

Configure the DFNT Module

4.1.2 Radio Configuration

Expand the Wireless Configuration section
and double-click on the
The default Signal LED 1 through 4 parameter values are fixed and cannot be
modified. If you need to change the values for the remaining parameters in this
dialog box, make sure to save your changes before moving on to the next step.
As you select each parameter, the help text area in the lower right area of the
dialog box displays information to help you make your selections.
Transmit Rate
This parameter defines the data rate(s) for transmission of directed messages.
Possible values are outlined in the following table.
Value Definition
1 Fixed 1 Mbit (1)
2 Fixed 2 Mbit (2)
3 Auto fallback high (11, 5.5, 2, 1)
4 Fixed medium rate (5.5)
5 Fixed high rate (11)
ProSoft Technology, Inc.
September 6, 2007
6201-WA-ASCII ♦ ProLinx Wireless
High Speed Wireless ASCII Generic Serial Gateway
icon.
Page 25 of 50