Table of Contents
Advertisement
6201-WA-DFNT ♦ ProLinx Wireless
High Speed Wireless ASCII Generic Serial Gateway
3.1.5 Radio PWP Multicast Group List
This section does not contain any data for the sample application. The sample
application uses UNICAST transmission and therefore there is no need to enter
IPs of other devices in this section. The ProLinx PWP Driver Manual describes
this section in detail.
3.1.6 ASCII Port 0
The sample configuration file requires that this module be configured for
matching serial port communication with the ASCII Communication Device.
Expand the ASCII Port 0 section.
Double-click on the
The remaining parameters are set to ensure that the ASCII module can
communicate with the PLC. Refer to the ASCII Driver Manual located on the
ProLinx solutions CD for detailed information on each of these parameters.
Page 20 of 50
icon.
Configure the ASCII Module
ProSoft Technology, Inc.
September 6, 2007
Advertisement
Table of Contents
