Load The Required Software; Install Prosoft Configuration Builder (Pcb) - ProLinx 6201-WA-ASCII Setup Manual

Load the Required Software

2 Load the Required Software
In This Chapter
There is one application (ProSoft Configuration Builder) and one file (PPF) that
you must download from the ProLinx Solutions CD to your PC or LAPTOP
whether you are using the sample configuration or are modifying the
configuration to suit the needs of your application. This section describes how to
get everything you need loaded to your PC. You must perform these steps
regardless of whether you are configuring your modules now or just
reading about the sample applications.
2.1

Install ProSoft Configuration Builder (PCB)

ProSoft Configuration Builder helps you configure the module for your
application.
Insert the ProLinx Solutions CD into the CD-ROM drive on your PC or
1
LAPTOP. The ProLinx Solutions splash page appears:
Select
2
Follow the prompts to install ProSoft Configuration Builder to your hard disk.
3
ProSoft Technology, Inc.
September 6, 2007
Install ProSoft Configuration Builder (PCB)............................ 11
Copy the Sample Application File .......................................... 12
Install Configuration Tool.
6201-WA-DFNT ♦ ProLinx Wireless
High Speed Wireless ASCII Generic Serial Gateway
Page 11 of 50