Complete The Prosoft Configuration Builder Sections; Radio Ethernet Configuration - ProLinx 6201-WA-ASCII Setup Manual

6201-WA-DFNT ♦ ProLinx Wireless
High Speed Wireless ASCII Generic Serial Gateway
3.1

Complete the ProSoft Configuration Builder Sections

3.1.1 Radio Ethernet Configuration

Double-click the
Every ASCII module is set up with the defaults shown in the example. You may
have to modify values such as the Radio Default Gateway, the Network Name
(SSID), and the Station Name to suit the needs of your network. The Station
Name may be modified when using more than one ASCII module.
Note: All modules must have the same Subnet Mask, Default Gateway, and Network
Name (SSID) if they are all located on the same network. Only the fourth octet in the
Radio_IP address must be different for each module. Please refer to Default Module
Configuration Assignments for a list of pre-assigned ProSoft product IP addresses.
The PWP Driver Manual located on the ProLinx Solutions CD contains a
description of the remaining parameters. If you are making changes, be sure to
save your changes before moving on to the next step.
Page 14 of 50
icon.
Configure the ASCII Module
ProSoft Technology, Inc.
September 6, 2007