Page 1
High Precision and sensitivity, it is applicable for Basement, machine room, hotel, water tower, pool, swimming pool, solar, kitchen, bathroom and other leaks or water overflow detection. Technical Information Compatible with any network controller ZigBee HIOTH TECHNOLOGY CO.,LTD.
Page 2
(1) If the Smart Water Leakage Sensor has not been included into the network, short press the Reset button to enter the network inclusion condition, at this time the network status indicator LED flash (3 times/second). If the network inclusion success, the network status indicator LED HIOTH TECHNOLOGY CO.,LTD.
Page 3
Choose "FBee" to enter the Network Inclusion mode on the APP, then click " ". When prompt a message “Request Access Success”, please go to the device list interface, and refresh the device list, the device will be displayed. HIOTH TECHNOLOGY CO.,LTD.
Page 4
Remove the battery Mylar film when ready to let the detector work. If there is no battery inside the detector or need to replace a new battery, please insert the HIOTH TECHNOLOGY CO.,LTD.
Page 5
HIOTH User Manual battery first. Fig.3 Make sure the device has been included into the network normally. Tear off the gummed film; stick the equipment in the required area. Fig.4 Insert detector to fixed hang board. HIOTH TECHNOLOGY CO.,LTD.
Page 6
Please pay attention to the service life of the battery, replace the battery in time. Please pay attention if it alarms. Besides proper use of alarm, we should also strengthen the consciousness of fire safety. HIOTH TECHNOLOGY CO.,LTD.
Need help?
Do you have a question about the CT-SMZB2013-HM and is the answer not in the manual?
Questions and answers