Updating Firmware - Rexing F10 User Manual

Updating Firmware

After locating the appropriate firmware from the Rexing website, follow these
instructions to update the firmware for your F10 Dashboard Camera.
1. Download the firmware file to your computer
2. Unzip the file
3. Format your memory card
4. Copy the firmware files to the root of your card (not within any folders)
5. Insert card into camera after safely ejecting from your computer
6. Power camera on while the camera is plugged in
7. The camera will update automatically. The screen will stay off but the status
light will stay on. This operation may take up to 1 minute to complete
8. After updating, you must format the memory card. Failure to do this will result
in the unit attempting to update the firmware every time it's turned on
9. (Do not disconnect the unit from power) Hold the power button to reboot
10. Upon reboot, you may disconnect your unit from power
11. Enjoy your updated device!
© 2 0 1 7 R E X I N G A l l R i g h t s R e s e r v e d .
Operating your F10 Dashboard Camera
37
Updating Firmware