Removing The Memory Card; Formatting The Memory Card - Rexing F10 User Manual

Removing the Memory Card

Before removing a memory card from your computer, you must first prepare it
for safe removal.
Before removing a memory card from your device:
1. Press the Power/OK button to stop the device from recording
2. Press and hold Power/OK button to power the device off.
3. Gently push the memory card in until you hear a click, and allow the
spring release to push the card out.
Do not remove the memory card while the device is transferring or
accessing information. Doing so can result in data loss or corruption, or
damage to the memory card or device. Rexing is not responsible for losses that
result from the use of damaged memory cards, including the loss of data.

Formatting the Memory Card

Using the camera to format the memory card:
Press the Power/OK button to stop recording
1.
Press the MENU button twice to enter the settings menu
2.
3. Use the
4. Press Power/OK to confirm your selection
5. Use the
Press Power/OK when the word "Yes" is highlighted in blue
6.
Before formatting a memory card, always remember to make backup
copies of all important data stored on the device. The manufacturer's
warranty does not cover loss of data resulting from user actions.
▲ ▼
buttons to navigate down to the "Format" option
▲ ▼
buttons to navigate to the "Yes" option
© 2 0 1 7 R E X I N G A l l R i g h t s R e s e r v e d .
Installing your F10 Dashboard Camera
25
Getting Started