Motion Detection; Recording Audio; Date Stamp; Gravity Sensing - Rexing F10 User Manual

Operating your F10 Dashboard Camera
Settings

Motion Detection

Recommended setting: Off
Motion detection will record video when motion is detected by the device.
Note: The device needs to be powered to use motion detection function.

Recording Audio

Recommended setting: On
Allows you to record audio with your video, or turn off the microphone so that all
your recordings will be without audio.

Date Stamp

Allows you to stamp the date and time to your recordings. This will display all
the information about when the video was recorded at the bottom of the video.

Gravity Sensing

Recommended setting: Low
This feature acts as an accelerometer, measuring physical and gravitational
forces acting on the camera itself. If a change in these forces is detected, such
as during a vehicular accident, the device will perform an automatic file lock,
preserving your recording.
Note: Locked video files will not be erased during Loop Recording; they remain
on the memory card until manually deleted, or when the card is reformatted.
30
© 2 0 1 7 R E X I N G A l l R i g h t s R e s e r v e d .