Advertisement
STEP 6
Attach seat frame (F) to chair back frame (D) using short bolts (6), long
bolts (5), spring washers (2) and flat washers (3) as shown. do not tighten
the bolts in this step.
Note: Seat frame (F) has holes on each side. These holes are to attach
the seat board (E) in the next step. Ensure that the wider end of the holes
face down towards the ground.
STEP 7
Place seat board (E) upside down on a clean smooth surface. Attach
assembled chair frame to the seat board (E) with wood screw (7) using
a Phillips head screw driver (not included).
REQUIRED HARDWARE IN THIS STEP
NO.
2.
3.
9.
5.
6.
REQUIRED HARDWARE IN THIS STEP
NO.
DESCRIPTION
7.
WOOD SCREW
6
DESCRIPTION
SKETCH
SPRING WASHER
FLAT WASHER
OPEN WRENCH
LONG BOLT
SHORT BOLT
SKETCH
QTY
6 PCS
QTY
7 PCS
7 PCS
1 PC
4 PCS
3 PCS
Advertisement
