STEP 3
Turn the assembly upright. Place table top (A) down to the
assembly unit as shown, making sure table legs secure into top
STEP 4
Attach table legs (B) to table top (A) using Allen bolt (1), spring washer
(2) and flat washer (3) as shown.
Make sure the table is level, and tighten all Allen bolt (1) by Allen wrench.
REQUIRED HARDWARE IN THIS STEP
DESCRIPTION
NO.
ALLEN BOLT
1.
SPRING WASHER
2.
3.
FLAT WASHER
4.
ALLEN WRENCH
4
.
SKETCH
QTY
4 PCS
4 PCS
4 PCS
1 PC