Table of Contents
Advertisement
JADAC Power Support
4.1.7 Unit alarms
The unit alarm view will display all the static switch/UPS related alarm statuses
in an alarm indicator panel type view. System date and time is also shown
The virtual LED's are seen in two forms as shown below:
A full list of alarm meanings is given in Appendix C
Note that this is the last tab, as the tab has positioned itself on the right-most edge of the screen.
4.2
Menu navigation
The UPS has several menus as part of the interface to simplify tasks/instructions.
The factory menu is shown below as an example:
If the list is too long to be displayed, it will scroll until the focus reaches the bottom position.
A full list of menus and sub menus is given in Appendix D
3300 UPS Manual
LED OFF (enlarged)
LED ON (enlarged)
The arrow buttons are used to
scroll the focus line up or down.
The menu list may be longer
than what can be displayed on
the menu screen.
In this case, the focus will only
move until it is one position
away from the, after which, the
list will move instead of the
focus.
At the end of the list, the focus
will move the focus will move
into the last position
Page 16 of 24
Advertisement
Table of Contents
