Table of Contents
Advertisement
JADAC Power Support
4.1.1.6
The battery level can be seen in the form of a fill on the battery picture:
4.1.1.7
The various lines can be seen in three forms as follows:
The tab scrolling concept can also be seen in the next few illustrations.
4.1.2 AC values
The AC values view will display all the RMS AC voltages/currents in a tabular
form. Included on this view is the UPS temperature and output frequency.
Battery level indicator
These illustrations show some of the stages
the battery goes through as it discharges
Lines
DISABLED: The voltage on the line is out of limits or
there is no voltage on the line.
ENABLED: The voltage on the line is within limits but
the load is not powered via the line
ACTIVE:
The line is being used to support the load
3300 UPS Manual
Page 13 of 24
Advertisement
Table of Contents
