JADAC Power Support
4.1.1.2
The inverter block can be seen in three forms as follows:
4.1.1.3
The static switch can be seen in three forms as follows:
4.1.1.4
The bypass breaker can be seen in two forms as follows:
4.1.1.5
The battery block can be seen in three forms as follows:
Inverter block
DISABLED: The inverter is off.
ENABLED: The inverter is on but is not supporting the load.
ACTIVE:
The inverter is on and is supporting the load.
Static switch block
DISABLED: The static switch output is off.
ENABLED: The static switch is providing output but it is not
supporting the load.
ACTIVE:
The static switch is supporting the load.
Bypass breaker
OPEN
CLOSED:
The UPS is in maintenance bypass.
Battery block
DISABLED: The battery is depleted or not in circuit.
ENABLED: The battery voltage is within limits but is not
supporting the load..
ACTIVE:
The battery is supporting the load.
The UPS is not in maintenance bypass.
3300 UPS Manual
Page 12 of 24