Honeywell Dolphin CT60 Quick Start Manual page 12

Sync Data
To move files between your CT60 and a computer:
1. Connect the CT60 to your computer using a USB charge/
communication accessory.
2. By default, the CT60 is in USB charging only mode. To
enable file transfers, swipe down from the top of the Home
screen to access the Notifications panel.
3. Touch the USB notification, and then select either Transfer
files or Transfer photos (PTP).
4. Depending on the Windows® operating system on your
computer, either open File Explorer or Windows Explorer.
5. Under "Computer" or "This PC", click on the CT60. You can
now copy, delete and/or move files or folders between the
computer and CT60 or a microSD card installed in the CT60
as you would with any other storage drive (e.g., cut and
paste or drag and drop).
12