1. Go under RouterQoS and set the downstream to 100Mbit and Upstream to 10Mbit and enable QoS
then save.
2. Go under RouterQoSSmart Queue and edit WAN1 interface.
3. Enable Smart Queue on WAN1 and set the following options:
•
Qdisc = fq_codel.
•
Manager = Simple.
•
Link-layer = none.
4. Save and apply all changes, then reboot the router in order to take effect.
Figure 17: Smart Queue Status
QoS in VoIP Environment Guide
P a g e
|
22