Table of Contents
Advertisement
Testing the window/
door sensor
You can check the window/door
sensor's LED indicator and test the
performance of the window/door
sensor.
1
Remove the sensor unit cover.
2
Press M
N on the sensor unit.
3
Open and close the window or
door several times.
R Make sure that the LED
indicator lights in green when
you close the window or door.
4
Press M
N again.
Note:
R If the LED indicator lights in red
when the window or door is closed,
the window/door sensor is not
installed properly. Re-evaluate the
position of the sensor unit and
magnet unit (page 13).
Features available
when using the
[Home Network] app
Some of the window/door sensor's
features that are available when using
the [Home Network] app are listed
below. For more information, refer to
the User's Guide (page 19).
– Alarm system
You can use the app to arm and
disarm the alarm system, confirm
the current status of the sensor, and
view a log of previous events.
– Sensor integration
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
You can configure the window/door
sensor to trigger other system
events, such as camera recording,
turning on an electric device (such
as a lamp), etc. (Appropriate device
required.)
– Telephone alert
You can configure the system to call
a preprogrammed phone number
when the window/door sensor is
triggered.
Accessing the User's
Guide
The User's Guide is a collection of
online documentation that helps you
get the most out of the [Home
Network] app.
1
iPhone/iPad
Tap
in the app's home screen.
Android™ devices
Tap
or press your mobile
device's menu button in the app's
home screen.
2
Tap [User's Guide].
Note:
®
R Microsoft
Windows
®
Explorer
8 and earlier versions are
not supported.
R Android 4.1 or later versions are
recommended.
R You can also access the User's
Guide at the web page listed below.
www.panasonic.net/pcc/support/tel/
homenetwork/manual/
Appendix
®
Internet
19
Advertisement
Table of Contents
