Hfqlevl (Holdover And Freerun Quality Level) - Symmetricom TimeHub 5500 Reference Manual

Parameter
<value>
Note:

HFQLEVL (Holdover and Freerun Quality Level)

This keyword defines the quality assumed for the Clock card in SSM mode. This
value places SSM bits onto the output stream when in holdover. The keyword
format is:
HFQLEVL=<value>
Parameter
<value>
097-55501-02 Issue 7 – January, 2005
Value
CONTINUE The shelf generates outputs when in freerun mode.
SQUELCH The shelf does NOT generate outputs when in
freerun mode.
This feature is available in firmware versions 4142B and later.
The default FREEACT setting for a clock in a master shelf is
CONTINUE. With a master shelf, output is normally possible in
freerun.
The default FREEACT setting for a clock in a remote shelf is
SQUELCH. With a remote shelf, output is normally NOT possible
in freerun.
For output to be possible in freerun mode, FREEACT value must
be CONTINUE and the selected output port must be enabled and
in service (see INSRVC (In
(Squelch Output), on page 138).
Value
1 Stratum 1 Traceable (PRS)
2 Synchronized – Traceability Unknown (STU)
3 Stratum 2 Traceable (ST2)
4 Transit Node Clock Traceable (TNC)
5 Stratum 3E Traceable (ST3E)
6 Stratum 3 Traceable (ST3)
7 SONET Minimum Clock (SMC)
8 Do not use for synchronization (DUS)
Description
Service), on page 110 and
Description
TimeHub 5500 TL1 Reference Guide 107
Keywords
Keyword Description
SQUELCH