Kashino Technology P-500 User Manual page 18

[Description] Aligns all the data in one line to the specified position.
n selects the justification as follows:
N Justification
0,48 Left justification
1, 49 Centering
2, 50 Right justification
[Note] The command is enabled only when processed at the beginning of
This command executes justification in the printing area.
This command justifies the space area according to HT, ESC $.
[Default] n=0
[Example]
Left justification
ABC
ABCD
ABCDE
GS L nL nH
[Name] Set left margin
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 0≤nL≤255
0≤nH≤255
[Description] Sets the left margin using nL and nH.
The left margin is set to [(nL+nH×256) ×0.125 mm].
[Note] This command is
[Default] nL=0, nH=0
ESC B n
[Name] Set left blank char numbers
[Format] ASCII:
the line in standard mode.
Centering
effective only when processed at the beginning of
the line in standard mode.
If the setting exceeds the printable area, the maximum value of the
printable area is used.
Page 18 of 70
ABC
ABCD
ABCDE
GS L nL nH
29 76 nL nH
1D 4c nL nH
ESC B n
Right justification
ABC
ABCD
ABCDE