Command Detail; Print Commands - Kashino Technology P-500 User Manual

8.2 Command Detail

8.2.1 Print Commands

LF
[Name] Print and line feed
[Format] ASCII:
Decimal:
Hexadecimal:
[Description] Prints the data in the print buffer and feeds one line, based on the current
line spacing.
[Note] This command sets the print position to the beginning of the line.
[Reference] ESC 2, ESC 3
CR
[Name] Print and carriage return
[Format] ASCII:
Decimal:
Hexadecimal:
[Description] When automatic line feed is enabled, this command functions the same
as LF; when automatic line feed is disabled, this command is ignored.
[Notes] This command line feed is ignored with a serial interface model.
Sets the print starting position to the beginning of the line.
[Reference] LF
HT
[Name] Horizontal tab
[Format] ASCII:
Decimal:
Hexadecimal:
[Description] Moves the print position to the next horizontal tab position.
[Notes] This command is ignored unless the next horizontal tab position has
GS V
Select cut mode and cut paper (For cut)
ESC p m
Generate pulse (For drawer)
ESC c 5
Enable/disable panel buttons (For button)
GS ( F
Set adjustment values(s) (For 701BM)
FS C
Start receive buffer count (For cb65c)
FS S
Send receive buffer count(For cb65c)
FS s
save print parameter (for XBLY)
FS d
Load default leaving factory set (for XBLY)
Page 14 of 70
LF
10
0A
CR
13
0D
HT
9
09