Kashino Technology P-500 User Manual page 16

ESC D NUL cancels all horizontal tab positions.
The previously specified horizontal tab positions do not change, even if
[Default] The default tab positions are at intervals of 8 characters (columns 9, 17,
25...) for Font A (12×24).
[Reference] HT
ESC J n
[Name] Print and feed paper
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 0≤n≤255
[Description] Prints the data in the
(0.0049")].
[Notes] After printing is completed, this command sets the print starting
ESC d n
[Name] Print and feed n lines
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 0≤n≤255
[Description] Print the data in the buffer and feed paper n lines.
[Notes] This command sets the print
[Reference] ESC 2, ESC 3
.
the character width changes.
The character width is memorized for each standard mode.
print buffer and feeds the paper [n×0.125
position to the beginning of the line.
The paper feed amount set by this command does not affect the
values set by ESC 2 or ESC 3.
In standard mode, the printer uses the vertical motion unit (y).
line.
This command does not affect the line spacing set by ESC 2 or ESC
3.
The maximum paper feed amount is 1016 mm (40 inches). If the
paper feed amount (n×line spacing) of more than 1016 mm (40
inches) is specified, the printer feeds the paper only 1016 mm
inches).
Page 16 of 70
ESC J n
27 74 n
1B 4A n
ESC d n
27 100 n
1B 64 n
starting position to the beginning of the
mm
(40