Kashino Technology P-500 User Manual page 15

l
been set.
If the next horizontal tab position exceeds the printing area, the
printer sets the printing position to [printing area width+1].
Horizontal tab positions are set with ESC D.
If this command is received when the printing position is at [printing
area width+1], the printer executes print buffer-full printing of the
current line and horizontal tab processing from the beginning of the
next line.
ESC D
[Reference]
FF
Print the data in buffer and locate to the next black mark
[Name]
ASCII:
[Format]
Decimal:
Hexadecimal:
Print the data in the buffer.
[Description]
Locate to the black mark.
[Note]
Only board with black mark function support this command.
ESC D n1...nk NUL
[Name] Set horizontal tab positions
[Format] ASCII:
Decimal:
Hexadecimal:
[Range] 1≤n≤255
0≤k≤32
[Description] Set horizontal tab positions.
n specifies
from the beginning of the line.
k indicates the total number of horizontal tab positions to be set.
[Note] The horizontal tab position is stored as a value of [character width×n]
measured
includes the right-side character spacing, and
characters are set with twice the width of normal characters.
This command cancels the previous horizontal tab settings.
When setting n = 8, the print position is moved to column 9 by sending
HT.
Up to 32 tab positions (k=32) can be set. Data exceeding 32 tab
positions is processed as normal data.
Transmit [n]k in ascending order and place a NUL code 0 at the end.
When [n]k is less than or equal to the preceding value [n]k-1, tab setting
is finished and the following data is processed as normal data.
FF
12
0c
ESC D n1...nk NUL
27 68 n1...nk 00
1B 44 n1...nk 00
the column number for setting a horizontal
from the beginning of the line. The character width
Page 15 of 70
tab position
double-width