Setting An Alarm - Nokia Steel HR Installation And Operating Instructions Manual

Setting an Alarm

Enabling the Alarm
In order to enable and set an alarm, perform the following steps:
1. Open the Health Mate® app.
2. Go to your Timeline.
3. Tap Set your alarm.
If this screen is not displayed, swipe left or right in the top widget (colored part at the
top of the screen) until you find it.
4. Put your Nokia Steel HR™ close enough to your mobile device.
5. Tap the Alarm toggle to enable the alarm.
6. Tap and slide the wake up time up or down to select the alarm time.
You can only select multiples of five minutes.
7. If necessary, select a smart wake-up time when setting an alarm.
Your watch will then find the best moment to wake you up during that time period
to make for a smoother wake-up experience.
Nokia Steel HR™
v3.0 | May, 2017
EN - 28