Table of Contents
Advertisement
6. Tracking sensitivity*
This is the threshold for sound source detection.
The sound source is detected whenever the input audio level is larger than the threshold value. Set the value
according to surrounding sound volume conditions.
Setting range: −24 dB to 0 dB
Note
It is recommended that the threshold value be set a little higher than the ambient noise level.
7. Tracking speed*
Sets the speed at which the microphone tracks the sound source. The larger the number, the faster the
tracking speed.
Setting range: 1 to 100
8. Audio gain control
Corrects the level. Selecting ON displays a light blue frame that indicates the effective distance. The range
can be changed with the pointer or sliding bar.
Setting range: 0.5 m to 2.0 m (1.64 ft to 6.56 ft)
9. Visual trail
Leaves a visible sound source position trail on the screen.
Selecting ON makes it possible to leave a visual sound source trail. The amount of time the trail is left on the
screen can be changed with the Duration setting.
Setting range: 0.5 sec to 30 sec
* Not displayed when Tracking Control is set to OFF. (See the figure below.)
24
Advertisement
Table of Contents
